The Problem

Your 3D prints are ending up in landfill.

3D printing generated an estimated 12,590 tonnes of waste in 2020. Turned into filament, that's enough to reach the moon —

× 102 times

Only 18% of the plastic collected in Australia gets recycled. The rest goes to landfill, gets exported overseas, or is illegally dumped.

What are you doing with your 3D printed waste?

That's a lot of landfill — 3D printing industry waste visualisation

The Solution

We recycle your waste so you can focus on making.

Five steps. One supplier. Doorstep collection. Quarterly reporting.

01

Choose your filament

Reload your reusable ECO Spool 2 with PLA, PETG or ABS — virgin or recycled.

02

Print perfect prints

Pre-configured slicer profiles for Bambu Lab, UltiMaker and most major printers. No fine-tuning.

03

Bag your waste

Drop supports, failed prints and unused filament into the recycling bag at the bench — one bag per material.

04

Book a collection

Scan the QR on the bag when full. We collect from your doorstep.

05

Read the report

Waste is shredded and remanufactured into new recycled filament. Quarterly recycled-kg reports follow.

Materials Recycled

Three materials. One bag each.

Only STANDARD PRINT CO. filament is accepted — known feedstock is what makes the remanufactured filament print reliably. Segregate by material; mixed bags cannot be processed.

PLA / rPLA

The classroom and makerspace workhorse. Comes back as rPLA.

PETG / rPETG

Tougher parts that get handled. Comes back as rPETG.

ABS / rABS

Enclosed-printer functional parts. Comes back as rABS.

Full program terms on the recycling page.

What sets us apart

Refilling. Recycling. Reporting.

Does your filament provider do that? Tell us your institution's sustainability targets and we'll track the numbers that matter to your faculty.

Choose a bundle

Shop

Your makerspace. Your choice.

Three bundles, one order each. Reusable ECO Spool 2 spools and 1 kg PLA refills; the lab sizes add the 100 L recycling bag and your first doorstep collection.

MAKER04 · Starter

4 colour mixesTry us

Starter Bundle — PLA

The first month of printing, in one box. One ECO Spool 2 plus four 1 kg PLA refills — so you can change colour without buying a new spool every time. Choose your colour mix: White ×4, Black ×4, 2 White + 2 Black, or Mixed (White, Black, Grey, Red — one of each). PLA runs at stock settings on any open-bed printer: no enclosure, no chamber heater, standard 0.4 mm brass nozzle. Print prototypes, brackets, jigs, display models, classroom projects and figures the day it lands. Refills are spool-free — you keep the ECO Spool 2 and reload it. Filament is 1.75 mm, mylar-jacketed with passive desiccant. 1 × ECO Spool 2 reusable spool 4 × PLA 1 kg refill in your chosen colour mix Next step up: the Open-Bed Mastery Bundle adds PETG and TPU.

1 ×ECO Spool 2
2 ×PLA — White
2 ×PLA — Black

14-day money-back guarantee
Free Australia-wide delivery

$120.00

Save $8.00 vs buying separately

Details

MK10 · Makerspace

Best for labs

Makerspace Bundle — 10

A term of filament for ten printers, on refillable spools, with the recycling built in. Ten ECO Spool 2 reusable spools and ten 1 kg PLA White refills — one spool and one refill per printer. When the scrap piles up, the 100 L recycling bag takes failed prints, purges and supports back for reprocessing. 10 × ECO Spool 2 reusable spool 10 × PLA White 1 kg refill 1 × 100 L filament recycling bag (PLA) + doorstep collection Includes the 100 L recycling bag and one free doorstep collection — priced at half the bag’s standalone cost to get your lab onto the recycling system. Fill the bag with PLA prints and offcuts and we collect it from your door when it is full. Only STANDARD PRINT CO. filament is accepted for recycling — one bag per material. Filament is 1.75 mm, mylar-jacketed with passive desiccant. 2.85 mm available on request. Subscription available every 2 months — refills recurring, spools and collection on the first order. Ask us.

10 ×ECO Spool 2
10 ×PLA — White
1 ×100 L filament recycling bag (PLA)

Recycling bag + 1 free collection included

Includes the 100 L recycling bag and one free doorstep collection — priced at half the bag’s standalone cost to get your lab onto the recycling system.

14-day money-back guarantee
Free Australia-wide delivery

$565.00

Sized for up to 10 printers

Save $125.00 vs buying separately

Details

MK30 · Makerspace

Full loop

Makerspace Bundle — 30

Thirty kilograms of PLA for a busy makerspace, on refillable spools, with the recycling built in. Ten ECO Spool 2 reusable spools and thirty 1 kg PLA refills — ten white, ten black, ten grey — so each spool cycles through three refills over the term. The 100 L recycling bag takes failed prints, purges and supports back for reprocessing. 10 × ECO Spool 2 reusable spool 10 × PLA White 1 kg refill 10 × PLA Black 1 kg refill 10 × PLA Grey 1 kg refill 1 × 100 L filament recycling bag (PLA) + doorstep collection Includes the 100 L recycling bag and one free doorstep collection — priced at half the bag’s standalone cost to get your lab onto the recycling system. Fill the bag with PLA prints and offcuts and we collect it from your door when it is full. Only STANDARD PRINT CO. filament is accepted for recycling — one bag per material. Filament is 1.75 mm, mylar-jacketed with passive desiccant. 2.85 mm available on request. Subscription available every 2 months — refills recurring, spools and collection on the first order. Ask us.

10 ×ECO Spool 2
10 ×PLA — White
10 ×PLA — Black
10 ×PLA — Grey
1 ×100 L filament recycling bag (PLA)

Recycling bag + 1 free collection included

Includes the 100 L recycling bag and one free doorstep collection — priced at half the bag’s standalone cost to get your lab onto the recycling system.

14-day money-back guarantee
Free Australia-wide delivery

$1125.00

Sized for up to 30 printers

Save $125.00 vs buying separately

Details

Existing customer printing 20 kg+/month? Skip the bundle — request a recycling bag direct.

Subscription

Every 2 months.

The same bundles on a standing order. The first delivery brings the ECO Spool 2 spools, the recycling bag and the refills; every delivery after that is refills only, because the spools stay on the bench. Subscription pricing applies.

Subscription pricing

Tell us the bundle and we send the 2-monthly subscription quote.

Ask about a subscription

MAKER04 · Starter

Starter Bundle — PLA

First order $120.00 · then refills every 2 months

First delivery: 1 × ECO Spool 2 · 4 × 1 kg refill
Every 2 months: 4 × 1 kg refill

14-day money-back guarantee
Free Australia-wide delivery

Online subscriptions coming — contact us to set one up

MK10 · Makerspace

Makerspace Bundle — 10

First order $565.00 · then refills every 2 months

First delivery: 10 × ECO Spool 2 · 10 × 1 kg refill · 100 L recycling bag + collection
Every 2 months: 10 × 1 kg refill

14-day money-back guarantee
Free Australia-wide delivery

Online subscriptions coming — contact us to set one up

MK30 · Makerspace

Makerspace Bundle — 30

First order $1125.00 · then refills every 2 months

First delivery: 10 × ECO Spool 2 · 30 × 1 kg refill · 100 L recycling bag + collection
Every 2 months: 30 × 1 kg refill

14-day money-back guarantee
Free Australia-wide delivery

Online subscriptions coming — contact us to set one up

FAQs

Questions worth answering.

Enterprise

More than 30 printers?

Multi-site campuses, print farms and fleets that outgrow the bundles get a scoped program: custom refill volumes, multiple bags per material, a collection schedule and consolidated reporting.

Scope an enterprise program

3D Print
Recycling.
Made Operational.

Your 3D prints are ending up in landfill.