Back to Materials

    Downloads

    Filament Datasheets:

    Technical Data Sheets (TDS)

    Safety Documentation

    Material Safety Data Sheet (MSDS) Downloads

    Download the relevant MSDS for filament (FFF) and feedstock (FGF).

    FFF – Filament

    Material Extrusion / FFF-FDM
    MATERIALFILEDOWNLOAD
    ABS Filament
    PDFDownload
    ABS+ Filament
    PDFDownload
    ASA Filament
    PDFDownload
    HIPS Filament
    PDFDownload
    PLA Filament
    PDFDownload
    PLA+ Filament
    PDFDownload
    PLA+ Wood Filament
    PDFDownload
    rPLA Filament
    PDFDownload
    PETG Filament
    PDFDownload
    PETG-CF Filament
    PDFDownload
    rPETG Filament
    PDFDownload
    PP Filament
    PDFDownload
    TPU Filament
    PDFDownload
    PHA Filament
    PDFDownload

    Matching safety sheets for the following nylon filaments are not currently published here. Request the sheet for your material and grade.

    Request PA6 safety sheetRequest PA12 safety sheetRequest PA6-CF safety sheetRequest PA12-CF safety sheet

    FGF – Feedstock

    Pellet / Granulate / Regrind
    MATERIALFILEDOWNLOAD
    ABS Pellet
    PDFDownload
    ABS Regrind
    PDFDownload
    rPLA Pellet
    PDFDownload
    rPLA Regrind
    PDFDownload
    rPETG Pellet
    PDFDownload
    rPETG Regrind
    PDFDownload

    For another material or form, request its matching safety data sheet.

    Filament Datasheets

    Technical Data Sheet (TDS) Downloads

    STANDARD PRINT CO. reference properties and printing values from our material comparison guide. These sheets are not batch test certificates.

    FFF – Filament

    Material Extrusion / FFF-FDM
    MATERIALFILEDOWNLOAD
    PLA FilamentPDF
    rPLA FilamentPDF
    PLA+ FilamentPDF
    PLA+ Wood FilamentPDF
    PETG FilamentPDF
    rPETG FilamentPDF
    PETG-CF FilamentPDF
    PC FilamentPDF
    PP-CF FilamentPDF
    ABS FilamentPDF
    ASA FilamentPDF
    HIPS FilamentPDF
    TPU 95A FilamentPDF
    PA6 FilamentPDF
    PA12-CF FilamentPDF
    PP FilamentPDF
    PHA FilamentPDF

    Current technical reference sheets for the following nylon filaments are not published here.

    Request PA12 technical dataRequest PA6-CF technical data

    Need a sheet for another material? Ask for its technical data.

    Find your material

    Print Settings

    Material Settings & Slicer Profiles

    Starting values from the same records as the TDS downloads. Match your printer, nozzle and build surface, then calibrate.

    Filament reference settings; temperatures in degrees Celsius and fan settings in percent.
    MaterialNozzleBedPart coolingEnclosure
    PLA190-240°C60°C100%No
    rPLA180-200°C45°C100%No
    PLA+190-240°C60°C100%No
    PLA+ Wood190-240°C60°C100%No
    PETG220-260°C70°C10-40%No
    rPETG210-230°C70°C10-40%No
    PETG-CF230-240°C60-70°C100%Optional
    PC260-280°C90-110°C0-60%Yes
    PP-CF220-250°C80-100°CNot recordedYes
    ABS220-250°C90-100°C10-60%Yes
    ASA240-280°C90-100°C0-30%Yes
    HIPS220-250°C90-110°C0-30%Yes
    TPU 95A220-240°C30-45°C50-100%Optional
    PA6230-260°C80-120°C0-30%Yes
    PA12-CF260-290°C80-100°C100%Yes
    PP180-250°C80-100°CNot recordedYes
    PHA205-220°C40-60°C0-80%Optional

    Current print-setting references for the following nylon filaments are not published here. Confirm the material and printer requirements before choosing settings.

    Request PA12 print settingsRequest PA6-CF print settings

    Start dry. Keep it dry.

    Our filament is ready to print from an intact, sealed bag. Reseal it in the foil bag with maintained desiccant between prints. Drying guidance applies after moisture exposure, when needed.

    Check storage and recovery drying

    Build a profile for your printer

    Use a maintained Bambu Studio or OrcaSlicer profile for the actual machine and nozzle. Tune the material, test a small part and save the settings that work.

    Calibrate your materialCreate a shared slicer profile