Bambu Lab AMS 2 Pro

The Bambu Lab AMS 2 Pro is the next-generation Automatic Material System, combining active filament drying with multi-material printing in a single unit. Whether you're printing functional multi-material parts or simply want to keep your filament dry and ready to print, the AMS 2 Pro delivers. Key Features Active Air Vent Drying up to 65 degrees C — automated venting facilitates dehumidification during drying and ensures air-tight sealing for weeks of quality printing Up to 24-Colour/Multi-Material Printing — serially connect up to 4 AMS 2 Pro units for 16 filaments, or mix with AMS HT units for up to 24 total RFID Auto-Match — automatically detects Bambu official filaments and applies optimal drying settings 60% Faster Filament Feeding — permanent magnet synchronous servo motor accelerates filament changes, saving ~10 minutes per 100 changes Tool-Free Filament Tube Access — direct access to PTFE tubes without disassembly Ceramic Filament Inlets — Vickers hardness of 1200 for exceptional durability with abrasive filaments Intelligent Spool Rotation — spools rotate automatically during drying for even moisture removal Specifications Specification Detail Dimensions 372 x 280 x 226 mm Max Drying Temperature 65 degrees C (ambient above 25 degrees C) Spool Compatibility (Width) 50-68 mm Spool Compatibility (Diameter) 197-202 mm Supported Materials PLA, PETG, ABS, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, PLA-CF, PAHT-CF, PETG-CF, TPU for AMS Max Units (Serial) 4 x AMS 2 Pro + 8 x AMS HT = 24 filaments Printer Compatibility & Required Accessories The AMS 2 Pro is compatible with all Bambu Lab printers, but requires specific cable/adapter configurations depending on your printer and how many units you are connecting: Printer 1-2 Units 3+ Units A1 Series Included in box - X1 / P1 Series 1 unit: Filament Buffer (SA003) required per unit. 2+ units: Switching Adapter required per unit Switching Adapter per unit P2S Included in box Additional accessories may apply H2S Included in box Additional accessories may apply H2D / H2C Included in box Additional accessories may apply X2D Included in box Additional accessories may apply Note: For X1/P1 series printers, a Filament Buffer (SA003) is required for each AMS 2 Pro unit connected as a single unit. A Switching Adapter is required for each additional AMS 2 Pro when connecting 2 or more. What is in the Box AMS 2 Pro unit PTFE Tubes (185mm x2, 225mm x2, 900mm x1) Printer-specific connection cables (varies by configuration) Quick start guide Australian Warranty All Bambu Lab products purchased through STANDARD PRINT CO. are covered by Australian Consumer Law and backed by our local support team in Sydney.