Do I need an enclosed printer for PA12?

An enclosure requirement is not recorded here for PA12. Confirm the material and printer requirements before printing.

Does PA12 need drying before printing?

STANDARD PRINT CO. filament is ready to print from an intact, sealed bag; no initial drying is needed. Reseal it in the foil bag with maintained desiccant between prints. After moisture exposure, assess recovery drying separately. Storage does not remove absorbed moisture; moisture-sensitive materials may need protected feeding while printing.

What nozzle temperature should I use for PA12?

A nozzle-temperature reference is not recorded here for PA12. Ask for the material's current technical data before choosing settings.

NYLON FAMILY

PA12

Engineering

Engineering-grade nylon with the lowest moisture absorption of any nylon polymer, excellent chemical resistance, and high impact strength. The most processable nylon for FDM printing.

Buy PA12 →Not Sure? Use the Selector

WHY USE PA12

PA12 absorbs under 0.5% moisture — the lowest of any nylon — so it stays dimensionally stable, prints more reliably, and requires less drying than PA6. It resists oils, greases, fuels, salt water, and most solvents, with a heat deflection temperature above 130°C at 0.45 MPa. The result is an engineering-grade material that's tough enough for end-use parts but forgiving enough to process on a well-equipped desktop printer.

Snap-fit housings, automotive clips and brackets, chemical-resistant enclosures, gears, bearings, and any functional part requiring toughness, flexibility, and dimensional stability in demanding environments.

PRINTING REFERENCE

How to Print PA12

A technical reference is not recorded here for this material. Ask for its current material data before choosing print or drying settings.

Our filament is ready to print from an intact, sealed bag; no initial drying is needed. Reseal it in the foil bag with maintained desiccant between prints. Storage does not remove absorbed moisture.

Check storage and recovery drying

PROPERTIES

Key Characteristics

Low moisture absorption (<0.5%)Chemical resistantWear resistantHeat resistant (130°C HDT)High impact strength (12 kJ/m²)Self-lubricatingDimensionally stable

DOWNLOADS