What schools buy from us, in one order.

One semester of classroom printing, ordered in a single click. Recommended for 4 printers with AMS — one AMS load per printer (3 × PLA + 1 × rPETG). Refills only: your ECO Spool 2 spools stay in service and get reloaded. PLA White — the classroom workhorse. Prints at stock settings on any machine, no enclosure needed, and takes paint and marker cleanly for student projects. rPETG Natural — 90% recycled, tougher and less brittle than PLA for parts that get handled, dropped and assembled. TPU 95A — one flexible spool for the design unit that needs grips, gaskets or hinges. Contents: 12 × PLA White 1 kg refill · 4 × rPETG Natural 1 kg refill · 1 × TPU 95A Black 1 kg. Add ECO Spool 2 spools separately if you are standing up new machines.

• 12 ×PLA — White
• 4 ×rPETG — Natural
• 1 ×TPU95A Filament — Black

One semester of classroom printing for a full lab, ordered in a single click. Recommended for 8 printers with AMS — one AMS load per printer (3 × PLA + 1 × rPETG). Refills only: your ECO Spool 2 spools stay in service and get reloaded. PLA White — the classroom workhorse. Stock settings on any machine, no enclosure needed. rPETG Natural — 90% recycled, tougher and less brittle than PLA for parts that get handled and assembled. TPU 95A — flexible spools for grips, gaskets and hinges. Contents: 24 × PLA White 1 kg refill · 8 × rPETG Natural 1 kg refill · 2 × TPU 95A Black 1 kg.

• 24 ×PLA — White
• 8 ×rPETG — Natural
• 2 ×TPU95A Filament — Black

One semester of classroom printing across a whole department, ordered in a single click. Recommended for 12 printers with AMS — one AMS load per printer (3 × PLA + 1 × rPETG). Refills only: your ECO Spool 2 spools stay in service and get reloaded. PLA White — the classroom workhorse. Stock settings on any machine, no enclosure needed. rPETG Natural — 90% recycled, tougher and less brittle than PLA for parts that get handled and assembled. TPU 95A — flexible spools for grips, gaskets and hinges. Contents: 36 × PLA White 1 kg refill · 12 × rPETG Natural 1 kg refill · 3 × TPU 95A Black 1 kg.

• 36 ×PLA — White
• 12 ×rPETG — Natural
• 3 ×TPU95A Filament — Black

A first classroom printer, installed and taught — not a box on a bench. Built on the Bambu Lab P2S Combo with AMS: an enclosed, four-material machine that handles PLA and PETG for teaching, and ABS or ASA when a class needs a functional part. Bambu Lab P2S Combo (printer + AMS): $1,450.00 4 × PLA White 1 kg refill: $112.00 ($28.00 each); 4 × ECO Spool 2 spools: $72.00 ($18.00 each) Level 1 and Level 2 in-person training, 4-hour session for your staff: $1,250.00 Pre-tuned settings profiles and 40-page textbook included at no charge Initial freight and courier: $67.80, included in the package total Print class sets, teaching aids, STEM project parts, design prototypes and replacement fittings. A standard 0.4 mm brass nozzle covers everything in this pack; fit a hardened nozzle before printing carbon-filled materials. Annual Care is optional: $299 per printer for the first plan year, for 1 Recalibration Service and 1 Repair Credit. Package without Annual Care: $2951.80. With Annual Care: $3250.80. All prices AUD including GST. Faults covered by the Australian Consumer Law or the 12-Month Warranty are fixed at no cost and never use your plan.

For a faculty that has outgrown its first machine — bigger parts, higher duty cycle, real engineering materials. Built on the Bambu Lab H2S Combo with AMS: a large-format, actively heated-chamber printer that runs nylons, carbon-filled composites, ABS and ASA as well as everyday PLA and PETG. Bambu Lab H2S Combo (printer + AMS): $2,490.00 4 × PLA White 1 kg refill: $112.00 ($28.00 each); 4 × ECO Spool 2 spools: $72.00 ($18.00 each) Level 1 and Level 2 in-person training, 4-hour session for your staff: $1,250.00 Pre-tuned settings profiles and 40-page textbook included at no charge Initial freight and courier: $67.80, included in the package total Suits TAS and design faculties printing large assemblies, functional prototypes and end-use parts. Fit a hardened nozzle before printing carbon-filled materials — they will destroy a brass one. Annual Care is optional: $299 per printer for the first plan year, for 1 Recalibration Service and 1 Repair Credit. Package without Annual Care: $3991.80. With Annual Care: $4290.80. All prices AUD including GST. Faults covered by the Australian Consumer Law or the 12-Month Warranty are fixed at no cost and never use your plan.

Every capability on one bench, future-proofed for the length of a curriculum. Built on the Bambu Lab H2D Combo with AMS: dual-nozzle, large-format and actively heated-chamber — true multi-material printing, dissolvable supports, and the full engineering material range including nylons and carbon-filled composites. Bambu Lab H2D Combo (dual-nozzle printer + AMS): $2,950.00 4 × PLA White 1 kg refill: $112.00 ($28.00 each); 4 × ECO Spool 2 spools: $72.00 ($18.00 each) Level 1 and Level 2 in-person training, 4-hour session for your staff: $1,250.00 Pre-tuned settings profiles and 40-page textbook included at no charge Initial freight and courier: $67.80, included in the package total The pick when one machine has to serve design, engineering and STEM across a whole school. Fit a hardened nozzle before printing carbon-filled materials. Annual Care is optional: $299 per printer for the first plan year, for 1 Recalibration Service and 1 Repair Credit. Package without Annual Care: $4451.80. With Annual Care: $4750.80. All prices AUD including GST. Faults covered by the Australian Consumer Law or the 12-Month Warranty are fixed at no cost and never use your plan.