Bambu Lab H2D

The Bambu Lab H2D is a dual-nozzle, large-format 3D printer built for multi-material work. Two independent nozzles reduce purge waste when pairing model and support materials, while the 350°C hotends, 65°C actively heated chamber and three-stage air filtration open up the full range of engineering polymers on a 325 × 320 × 325 mm platform.Key Features Dual-Nozzle System — Two nozzles for multi-material and multi-colour printing — 325 × 320 × 325 mm single-nozzle build volume, 300 × 320 × 320 mm in dual-nozzle mode 350°C High-Temperature Hotends — All-metal hotends with hardened steel nozzles and extruder gear for abrasive and high-performance filaments 65°C Active Chamber Heating — Consistent thermal environment for warp-free ABS, ASA, PC, PA, PPS and fibre-reinforced printing 1,000 mm/s Toolhead Speed — 20,000 mm/s² acceleration with an optional high-flow hotend rated to 65 mm³/s Three-Stage Air Filtration — G3 pre-filter, H12 HEPA filter and granulated coconut shell activated carbon filter Triple Camera Monitoring — 1080p live view, nozzle and toolhead cameras for remote supervision Servo Extrusion — High-precision permanent magnet synchronous extruder motor Laser and Cutting Ready — Upgradeable to the 10W and 40W laser modules and cutting module via the Laser Upgrade Kit Specifications Build Volume (Single Nozzle) 325 × 320 × 325 mm Build Volume (Dual Nozzle) 300 × 320 × 320 mm Max Nozzle Temperature 350°C Max Heatbed Temperature 120°C Max Chamber Temperature 65°C (active heating) Max Toolhead Speed 1,000 mm/s Max Acceleration 20,000 mm/s² Max Flow Rate 40 mm³/s standard; 65 mm³/s with optional high-flow hotend Nozzle Hardened steel; 0.4 mm included, 0.2–0.8 mm supported Cameras Live view, nozzle and toolhead cameras (1920 × 1080) Display 5-inch 720 × 1280 touchscreen Connectivity Wi-Fi (802.11 a/b/g/n) Power 100–240 VAC, 50/60 Hz (max 2,200 W @ 220 V) Printer Dimensions 492 × 514 × 626 mm Net Weight 31 kg Supported Materials Standard: PLA, PETG, TPU, PVA, BVOH Engineering: ABS, ASA, PC, PA, PET Fibre Reinforced and High Performance: Carbon/glass fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA; PPA-CF/GF, PPS, PPS-CF/GF What's in the Box Bambu Lab H2D printer Textured PEI build plate Spool holder Accessory box Combo variant adds the AMS 2 Pro WarrantyIncludes the STANDARD PRINT CO. 12-Month Warranty: defects repaired or replaced at no charge for 12 months from delivery, including the extruder unit. Consumables, such as the hotend, are excluded. Your Australian Consumer Law rights apply in addition. Care Plans for prepaid servicing are available separately.