Shipping at checkout
Warranty Available
Setup Support
Bambu Lab H2D Pro
Built for secure, LAN-cabled environments.
The H2D Pro is a professional-grade, fully enclosed 3D printer built for engineering-grade materials and multi-material workflows. A 350°C dual-nozzle system with tungsten carbide nozzles, 65°C active chamber heating, and enterprise-level network security bring industrial capability to the desktop.
Key Features
- Dual-Nozzle System with Automatic Switching
- 350°C High-Temperature Capability (PPA-CF, PPS, PPS-CF/GF)
- 65°C Active Chamber Heating
- Tungsten Carbide Nozzle for Abrasive Filaments
- 50μm Motion Accuracy via Vision Encoder
- Enterprise Networking (802.1X, WPA2-Enterprise)
Select Configuration
Available to backorder
Technician's Note
"The H2D Pro is the only desktop Bambu we currently recommend for true engineering production — PPA-CF, PPS, carbon and glass-fibre reinforced composites. The tungsten carbide nozzle and 65°C active chamber are the real story; everything else (enterprise networking, triple cameras, dual-nozzle) is how it survives in a facility environment. If you're printing functional end-use parts in high-performance polymers, this is where you stop comparison-shopping."
Highlights
What Makes It Special
Dual-Nozzle System
Two independent extruders with automatic switching for true multi-material and multi-colour engineering parts.
350°C + Tungsten Carbide Nozzle
Print PPA-CF, PPS, and carbon/glass-fibre reinforced composites without nozzle wear.
65°C Active Chamber
Consistent thermal environment for warp-free ABS, ASA, PC and PA at production scale.
Enterprise Networking
WPA2-Enterprise, 802.1X NAC, and physical network killswitches for secure facility deployment.
Vision Encoder Precision
50μm motion accuracy on every layer — verified, not extrapolated.
AMS 2 Pro + AMS HT Included
Four-spool active drying plus a dedicated high-temperature drying module (up to 85°C) ship in the box.
Capabilities
Complete Feature Set
Key Features
- Dual-Nozzle System with Automatic Switching
- 350°C High-Temperature Capability (PPA-CF, PPS, PPS-CF/GF)
- 65°C Active Chamber Heating
- Tungsten Carbide Nozzle for Abrasive Filaments
- 50μm Motion Accuracy via Vision Encoder
- Enterprise Networking (802.1X, WPA2-Enterprise)
- G3 + H12 HEPA + Activated Carbon Filtration
- Triple Camera AI Failure Detection
Additional Features
- Physical Network Killswitches
- 5-inch 720×1280 Touchscreen
- 32 GB eMMC Onboard Storage
- Ethernet 100 Mbps + Wi-Fi 802.11 a/b/g/n
- Includes AMS 2 Pro (4 spools) and AMS HT (high-temp dry, up to 85°C)
- Vision Encoder Plate and Emergency Stop Included
Technical
Specifications
Best For
- Secure environments that require wired LAN cable connectivity, with no Wi-Fi dependency
- Facilities with strict network access control (802.1X NAC, WPA2-Enterprise) or physical network killswitches
- End-use engineering production in PPA-CF, PPS, PPS-CF/GF
- Carbon-fibre and glass-fibre reinforced composites
- Multi-material functional prototypes and tooling
Consider Alternatives If
If you don't need 350°C nozzle, dual-nozzle, or enterprise networking
Consider the H2D — same chamber and build envelope, much lower priceIf you prioritise minimal purge waste in multi-colour over engineering materials
Consider the H2C with the Vortek multi-hotend systemCompatible Materials
Ideal Materials
Capable With Settings
Contents
What's in the Box
Frequently Asked Questions
Warranty & Support
Backed in Australia
A 12-Month Warranty on every new printer we sell, repaired at our Sydney service centre. It is in addition to your rights under the Australian Consumer Law.
Lifecycle Services
Uptime is the product
A printer is only as good as the hours it runs. Every machine we sell is backed by the same Sydney team that services it.
Repairs & diagnostics
Full system diagnosis at our Sydney service centre, with on-the-spot repairs where possible and a written report for anything that isn't.
Repair serviceScheduled servicing & calibration
Our Recalibration Service works through the 18-point Service Checklist. Book it every 12 months or 1,000 print hours, whichever comes first.
Recalibration & maintenanceOperator training
From beginner operator programs to advanced workflow optimisation — we build capability and reduce risk across your team.
Training & educationAccessories
Works with
Material handling and dry storage from the same ecosystem. AMS compatibility varies by printer generation — check each product page for your machine.