Shipping at checkout
Warranty Available
Setup Support
Bambu Lab P1S
All-around performance right out of the box.
The P1S delivers exceptional value with a fully enclosed design, high-speed printing up to 20,000 mm/s² acceleration, and multi-colour capability. It's the workhorse choice for users who need reliability and versatility.
Key Features
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-colour printing with AMS
- Up to 20,000 mm/s² acceleration
- Built-in camera for remote monitoring and timelapse
Select Configuration
In stock
Technician's Note
"The P1S is the ideal workhorse for print farms and businesses that want to run a 3D printing farm. It contains everything you need for reliable 3D printing and very few parts that you don't. It's the perfect sweet spot—really good value with proven reliability. We've seen countless P1S machines run thousands of hours with minimal maintenance. For anyone serious about production but not ready for heated chamber investment, this is where you start."
Highlights
What Makes It Special
Print Farm Workhorse
Proven reliability for thousands of hours of continuous operation with minimal maintenance.
Works Out of the Box
Set up in 15 minutes with auto bed-leveling, vibration compensation, and flow calibration.
Fully Enclosed Design
Protects prints from drafts and temperature fluctuations for reliable ABS and ASA printing.
Up to 20,000 mm/s² Acceleration
High-speed printing without compromising quality thanks to vibration compensation.
AI Failure Detection
Built-in cameras detect spaghetti, nozzle clogs, and first layer issues before they waste your time.
Remote Monitoring
Watch prints from anywhere via Bambu Handy app with notifications and remote control.
16-Colour Printing
Connect up to 4 AMS units for multi-colour capability in a single print.
LiDAR First Layer Inspection
Precision scanning ensures perfect first layer adhesion every time.
Capabilities
Complete Feature Set
Key Features
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-colour printing with AMS
- Up to 20,000 mm/s² acceleration
- Built-in camera for remote monitoring and timelapse
- Auto-Bed Leveling and Vibration Compensation
Additional Features
- Vibration and Flow Compensation
- Dual-gear Direct Extruder
- Hardened Steel Nozzle Included
- Compatible with AMS and AMS 2 Pro
- Print Recovery After Power Failure
- LiDAR for First Layer Inspection
- AI-powered Spaghetti Detection
- LED Chamber Lighting
- Quiet Operation with Stealth Mode
Technical
Specifications
Best For
- Print farms and manufacturing automation
- Small businesses and prototyping studios
- Multi-colour projects with AMS
- Remote monitoring and production setups
Consider Alternatives If
If you need high-temperature carbon-fibre or nylon filaments
Consider the H2S with active 65°C heated chamberIf you're a complete beginner wanting the easiest experience
Consider the P2S with its 5-inch touchscreen and simplified UIIf you need minimal purge waste for multi-colour production
Consider the H2C with Vortek multi-hotend systemCompatible Materials
Ideal Materials
Capable With Settings
Contents
What's in the Box
Frequently Asked Questions
Warranty & Support
Backed in Australia
A 12-Month Warranty on every new printer we sell, repaired at our Sydney service centre. It is in addition to your rights under the Australian Consumer Law.
Lifecycle Services
Uptime is the product
A printer is only as good as the hours it runs. Every machine we sell is backed by the same Sydney team that services it.
Repairs & diagnostics
Full system diagnosis at our Sydney service centre, with on-the-spot repairs where possible and a written report for anything that isn't.
Repair serviceScheduled servicing & calibration
Our Recalibration Service works through the 18-point Service Checklist. Book it every 12 months or 1,000 print hours, whichever comes first.
Recalibration & maintenanceOperator training
From beginner operator programs to advanced workflow optimisation — we build capability and reduce risk across your team.
Training & educationAccessories
Works with
Material handling and dry storage from the same ecosystem. AMS compatibility varies by printer generation — check each product page for your machine.