Shipping at checkout
Warranty Available
Setup Support
Bambu Lab X2D
Dual-Nozzle Multi-Material, Without the Purge Penalty.
The X2D is Bambu Lab's budget-friendly dual-nozzle enclosed printer. A main nozzle plus an auxiliary nozzle deliver cleaner support removal and faster multi-colour and multi-material printing, with 300°C hotend and 65°C active chamber heating for engineering materials like PA, PC, ABS, ASA, and CF-reinforced filaments.
Key Features
- Dual-Nozzle System (Main + Auxiliary)
- Cleaner Support Removal & Faster Multi-Colour Printing
- 300°C Hotend Temperature
- 65°C Active Chamber Heating
- 256×256×260 mm³ Build Volume
- 1000 mm/s Max Print Speed
Select Configuration
Available to backorder
Technician's Note
"The X2D is the value play for anyone who needs reliable dual-material printing without stepping up to the H2 line. The auxiliary nozzle dramatically cuts support-removal time on PETG/PLA combinations and means you can print soluble or break-away supports cleanly. With a 65°C active chamber and 300°C hotend, you also get genuine engineering material capability — PA, PC, ASA, and CF blends all run well — at a price point that suits labs, studios, and classrooms that aren't ready for the H2S."
Highlights
What Makes It Special
Dual-Nozzle System
Main + auxiliary nozzle for cleaner support removal and faster multi-material printing without single-nozzle purge waste.
65°C Active Chamber Heating
Engineering material capability — PA, PC, ASA, and CF blends — at an entry-level price point.
300°C Hotend Temperature
Handles high-temperature engineering filaments reliably across both nozzles.
1000 mm/s Max Speed
20,000 mm/s² acceleration with active vibration compensation for fast, accurate prints.
Full AI Detection
Liveview (1920×1080) and toolhead (1600×1200) cameras monitor prints in real time.
Built-in Air Purification
G3 pre-filter, H12 HEPA, and activated carbon filtration for cleaner workshop air.
Capabilities
Complete Feature Set
Key Features
- Dual-Nozzle System (Main + Auxiliary)
- Cleaner Support Removal & Faster Multi-Colour Printing
- 300°C Hotend Temperature
- 65°C Active Chamber Heating
- 256×256×260 mm³ Build Volume
- 1000 mm/s Max Print Speed
- 20,000 mm/s² Max Acceleration
- Closed-Loop Servo Motor Extruder
- Full AI Detection (Liveview + Toolhead Camera)
- Built-in G3 + H12 HEPA + Activated Carbon Filtration
Additional Features
- 5-inch 1280×720 HD Touchscreen
- Hardened Steel Nozzle (0.4mm included; 0.2/0.4/0.6/0.8 supported)
- Max Flow 40 mm³/s (Standard) / 65 mm³/s (High Flow)
- Liveview Camera 1920×1080 + Toolhead Camera 1600×1200
- Dual-band Wi-Fi Connectivity
- 8 GB eMMC Storage + USB Port
- Compatible with Bambu Studio, PrusaSlicer, SuperSlicer, Cura
Technical
Specifications
Best For
- Studios and classrooms needing dual-material capability
- Cleaner support removal on functional prints
- Multi-colour printing without H2-level investment
- Engineering material trials (PA, PC, ASA, CF blends)
- Buyers stepping up from a P1S who don't need the H2 form factor
Consider Alternatives If
If you only print PLA/PETG and don't need dual-material
Consider the P1S for a lower-cost enclosed single-nozzle setupIf you need a larger build volume and full engineering material support
Consider the H2S for the production-grade heated chamber platformIf you need the lowest-waste multi-colour solution available
Consider the H2C with the Vortek 6-hotend systemCompatible Materials
Ideal Materials
Capable With Settings
Contents
What's in the Box
Frequently Asked Questions
Warranty & Support
Backed in Australia
A 12-Month Warranty on every new printer we sell, repaired at our Sydney service centre. It is in addition to your rights under the Australian Consumer Law.
Lifecycle Services
Uptime is the product
A printer is only as good as the hours it runs. Every machine we sell is backed by the same Sydney team that services it.
Repairs & diagnostics
Full system diagnosis at our Sydney service centre, with on-the-spot repairs where possible and a written report for anything that isn't.
Repair serviceScheduled servicing & calibration
Our Recalibration Service works through the 18-point Service Checklist. Book it every 12 months or 1,000 print hours, whichever comes first.
Recalibration & maintenanceOperator training
From beginner operator programs to advanced workflow optimisation — we build capability and reduce risk across your team.
Training & educationAccessories
Works with
Material handling and dry storage from the same ecosystem. AMS compatibility varies by printer generation — check each product page for your machine.
